Fitness headset microphones take lots of00 abuse. We sweat, yell, and spit into these. At the end of our class when you hit shower that weak mic is still out there carrying out another class. We do the job our mics so hard that borders on abuse. Could it be any surprise we have numerous problems with them? But you can guide. With a little bit of care you can have of trouble free performance from the mic system.



Most set fitness headset microphones with regard to are designed to sit at the side of the face about two finger’s thickness away from the corner of your mouth, or slightly in front and the side of mouth, not directly before as with most head worn singer’s microphones. This helps to avoid increasing breath noises and wasting spit into the mic tablets as you teach.

If you need to confirm that the mic is operating after you have turned on the antanna and checked that the mixer and sound system are all established in go then, whatever you perform, NEVER blow into the microphone to test it!

Blowing tough into the delicate microphone tablet is the easiest way to harm it.

A simple “test - one - two” is all you need to say and you would not risk being the cause of costly, unnecessary repairs.

After use, always remove the foam windscreen from the mic, gently mop any sweat from the microphone stand, and remove the body package transmitter from your pouch seatbelt. To store the system when not utilized, hang the headset mike on a hook 1m(3ft) above a shelf for the all of that so that the headset’s cable is definitely kept as straight as is possible. Do not coil or kink the cable.

A few easy steps:

1) Don’t put the microphone stand capsule directly in front of you lips.

2) Never blown in the microphone.

3) If your mic was design to use a space-age foam windscreen then always use just one.

4) Always use a neoprene transmitter pouch belt.

5) Always remove the windscreen following use.

6) Always eliminate the body pack transmitter from pouch belt.

7) Hang the mic when not in use. Do not coil or kink the cable.

Feedback (that squealing or howling sound) occurs when the microphone is too loud, the music is too loud for your microphone or you are too close to the speakers. In most cases turning the microphone level decrease or moving away from the audio system will stop the howling and so just adjust the levels to obtain the right mix of voice over new music without the howls. If the trouble persists you may need to reposition your speakers to make sure that they are not ‘firing’ straight back at you. Most of us also find that better quality speakers are less prone to feedback.

If feedback persists because of the room’s architecture (full of showcases, windows, a polished wood floor and brick upper walls) or your speaker types (ie: some horn tweeters) subsequently there are a selection of feedback exterminator devices or 31 strap graphic equalizers available as a possible add-on component that fits between the Wireless Microphone Receiver along with the Mixer, that will filter out people annoying squeals.

When applied correctly, headset microphones that had been designed for group fitness make use of will give you many years of trouble free support. Take care of your fitness mic and it will take care of you.

If you adored this information and you would such as to receive even more info relating to Shure Wireless Microphone kindly see http://urlms.com/create.php.